Tag Archives: Hillesvåg Ullvarefabrikk

Epona Knitted by Siret

Posted on by

I wanted to share these brilliant photos that Siret – aka kollane on Ravelry and siretsini on Instagram – took of her beautiful daughter Annika wearing Epona, which she test knitted for me back in October last year. Siret knitted the cabled pullover in size Medium in Tinde pelt wool from Hillesvåg Ullvarefabrikk and writes on her Ravelry project page: “Unlike the sample, I use Tinde yarn, which is a thicker yarn than Sølje. Lys Rødlig Beige is the name of my Tinde tone – It is not gray or quite beige, but has a pinkish undertone.”

Siret’s collar is 5 cm instead of 9 cm as specified in pattern and writes: “I knit the inside of the collar with a softer yarn to prevent Tinde yarn from tickling the neck – Chester Wool Company Tibetan 4ply with merino, silk and Yak.”

Here is my introduction to the Epona pattern: Graceful cables run along the center of this pullover with a high rib, creating a narrower waist. A sweater perfect for riding or worn together with a skirt, it is crowned by a high collar with interfacing to make it stand up. Epona is Celtic for the Goddess of horses and knitted in Sølje Pelsull from Hillesvåg Ullvarefabrikk in a deep bottlegreen shade.

Siret writes on her project page: “The Epona is a beautiful pullover with a high standing neckline and slightly different cables in the center panel.  The high rib makes the waist narrower and feminine. The center panel cable is unique and not difficult to knit at all.”

Siret and Annika had their photoshoot at the Üügu-bluff on the island Muhu, next to the island Saaremaa, where they live, in Estonia. Thank you so much for fantastic test knitting and photography, Siret!

The English and Norwegian Epona pattern, in sizes XS to 2XL (84 to 124 cm/33 to 49″ bust) with a 24 sts and 32 rows in st st using 3 mm/US 2.5 needle measures 10 cm/4” square gauge,  is available to download from my Ravelry Store and from Lovecrafts. Yarn kits are available from Hillesvåg Ullvarefabrikk.

Share

Photoshoot at Mortensrud Church: Edia

Posted on by

The last Hillesvåg Ullvarefabrikk design of the four is Edia which has the same cable as the Gyro dress but is knitted in the darker colour of Tinde pelt wool yarn and made into an oversized pullover. The gorgeous Olivia Lindtein, with make-up & hair by Erica Poppe and jewellery by Kaja Gjedebo Design, looked stunning in the size Small sample, photographed by Eivind Røhne last November at Mortensrud Church in Oslo. Olivia wore it with 61 cm/24″ of positive ease.

Edia is an oversized sweater with a central cable panel, vent in the sides and a crew neck crowned by an I-cord bind off. The pullover has dropped shoulders and simple cables on the sleeves. Edia is an old Norwegian female name fitting for this relaxed sweater knitted in the gorgeous pelt wool yarn Tinde from Hillesvåg Ullvarefabrikk.

The yarn Tinde pelsull is made of 100% pelt wool with 260 meters/284 yards on each 100 gram skein. The sample is knitted in Burgunderlilla 2131 with a gauge of 21 sts and 30 rows in st st, after blocking measures 10 cm/4” square using 3.5 mm/US 4 needle. The sweater is worked back and forth in pieces and seamed. The neck is deeper on the front, than on the back.  

I have graded the pattern in sizes XS to 3XL with a bust circumference of 136 to 184 cm/53.5 to 72.5″. Intended ease is + 46-56 cm/18-22″. The English and Norwegian Edia pattern will be released after test knitting which begins on the 18th of May in my Ravelry group. Yarn kits will soon be available from Hillesvåg Ullvarefabrikk.

Share

Photoshoot at Mortensrud Church: Rebine

Posted on by

The skirt Rebine, designed for Hillesvåg Ullvarefabrikk, is out next in my series from the photoshoot at Mortensrud Church . The pencil skirt was made to as part of the set to be worn together with Jendine, both are knitted in Tinde pelt wool yarn, but it can easily be worn on its own. The gorgeous model Olivia Lindtein certainly convinced me of that. Here she is, with hair & make-up by Erica Poppe and jewellery by Kaja Gjedebo Design, wearing size Small as a party outfit with boots from Monica Stålvang, brilliantly captured by Eivind Røhne.

Rebine, an old Norwegian name, is a pencil skirt with an all over elegant cable pattern ending in a high waist. The skirt is shaped for the hip and the waist. Belt loops, inserted in each side seam, hold the skirt in place. Rebine is knitted in Tinde pelt wool by Hillesvåg Ullvarefabrikk.

The yarn Tinde pelsull is made of 100% pelt wool with 260 meters/284 yards on each 100 gram skein. The sample is knitted in Lys Marine 2125 with a gauge of 21 sts and 30 rows in st st, after blocking measures 10 cm/4” square using 3.5 mm/US 4 needle.

Above you see Rebine worn with the pullover Jendine. I have graded the Rebine pattern from sizes XS to 3XL with hip circumference of 86 to 132 cm/33.75 to 52)” and a waist circumference of  76 to 110 cm/30 to 43.25“. The skirt is worn with + 11 cm/4.25” ease on model who stands 167 cm/5’6” tall, while the intended ease is – 4 cm/1.5” to + 6 cm/2.25”. Olivia is ideally a size XS and not a size S.

The skirt is worked in pieces from the bottom and up. Make two belt straps to insert in the side seam. If you want to adjust the length of the skirt, remove up to 8 cm/3.25” or add an extra length before shaping the hip.

The English and Norwegian Rebine and Jendine pattern will be released after test knitting. Jendine begins 16th of March, while Rebine begins 6th of April in my Ravelry group. Yarn kits will soon be available from Hillesvåg Ullvarefabrikk.

Share

Photoshoot at Mortensrud Church: Jendine

Posted on by

I am thrilled to show you more brilliant photos taken by Eivind Røhne of the gorgeous Olivia Lindtein, with hair & make-up by Erica Poppe and jewellery by Kaja Gjedebo Design, at our photoshoot at Mortensrud Church back in November last year. This time it is the pullover Jendine, made for Hillesvåg Ullvarefabrikk. Olivia is wearing size S with a 90 cm/35.5″ bust circumference worn with + 7 cm/2.75″ ease.

Jendine is an a-line pullover with a panel of elegant cable ribbing at the center, longer rounded hem at the back and a shorter front. The v-neck splits the cable panel into two parts each framed with an I-cord. Jendine is an old historic Norwegian name that fitted this flowing pullover, that can be worn together with the Rebine skirt. Jendine is worked in the beautiful Tinde pelt wool by Hillesvåg Ullvarefabrikk.

The Tinde Pelsull by Hillesvåg Ullvarefabrikk is made of 100% pelt wool with 260 meters/284 yards on each 100 gram skein. The sample, skilfully knitted by Kristin Nygård – aka Quiltefeen – is in the shade “Lys marine”/Light Navy 2125 with a gauge of 21 stitches and 30 rows in stockinette stitch using 3.5 mm/US 4 measuring 10 cm/4” square. The pullover is worked in parts with garter stitch framing and seamed.

Here is a close up of the front, where you can see Kaja’s stunning jewellery too! I have graded the pattern in sizes XS to 3XL with a bust circumference of 84 cm to 136 cm/33 to 53.5″. Below is Jendine worn over the matching skirt Rebine.

A separate blog post is coming with more photos of the skirt and the set. The English and Norwegian Jendine pattern will be released after test knitting, which begins 16th of March in my Ravelry group. Yarn kits will soon be available from Hillesvåg Ullvarefabrikk.

Share

Photoshoot at Mortensrud Church: Gyro

Posted on by

I am thrilled to show you the brilliant photos taken by Eivind Røhne, at Mortensrud Church in Oslo in November last year, of the gorgeous Olivia Lindtein, with make-up and hair by Erica Poppe and jewellery by Kaja Gjedebo Design, wearing my Gyro dress knitted in both Tinde and Sølje pelt wool yarn, designed for Hillesvåg Ullvarefabrikk. I wanted to show Gyro both as a dress and also as a tunic with trousers beneath. Olivia is wearing size S, the second size, which has a 122 cm/48” wingspan. She has an 83 cm/32.75” bust circumference and stands 167 cm/5’6” tall.

Gyro is an oversized dress with bat sleeves knitted in two yarn thicknesses and colours. The center cable panel crowns the dress and ends in a wide neck with an I-cord bind off. Gyro is an old Norwegian female name, well suited to this dress or tunic made in pieces and sewn or crochet together with a garter stitch sleeve band. The dress is knitted in the divine pelt wool yarn from Hillesvåg Ullvarefabrikk; The thicker Tinde for the cable panel and the thinner Sølje for the side parts.

Gyro is graded from size XS to 2XL, To fit sizes:
UK 6 (8, 10, 12, 14, 16-18, 20-22)
US 2 (4, 6, 8, 10, 12-14, 16-18)
EU 34 (36, 38, 40, 42, 44-46, 48-50)

The sample is knitted by Grete Jenssen, aka ma9 on Ravelry, using 3.5 mm/US 4 on the center cable part in Tinde (100% pelt wool, 100 gram,  m/yds) and using 3 mm/US 2.5 on the side part in Sølje (100% pelt wool, 100 gram, m/yds. The gauge for Tinde in stockinette stitch is 21 stitches and 30 rows to 10 cm/4″ square, while for Sølje it is 24 stitches and 32 rows.

The dress is worked in pieces and seamed. You can easily adjust the length of the dress if you prefer, for instance by shortening (or lengthening) it with one or half a cable pattern repeat 12 cm/4.75” or 6 cm/2.25” and work less rows in between the increases.

The English pattern of Gyro will be test knitted beginning on 17th of February in my Ravelry group before the pattern is released. Yarn kits will be available with English or Norwegian pattern from Hillesvåg Ullvarefabrikk.

Share

New Design: Edia

Posted on by

The last new design for Hillesvåg Ullvarefabrikk is an oversized pullover called Edia with the same cable as I chose for the Gyro dress. I was uncertain which colour of pink or burgundy purple in Tinde pelt wool to choose for the cable on the dress, so I thought I could make a sweater with the cable in the second colour; “Burgunderlilla 2131”. The sample was beautifully knitted by Airin Hansen, aka Teodor on Ravelry, for me to sew (read: crochet with slip stitch) together and make the collar. Airin knitted Edia using a 3.5 mm/US 4 and a gauge of 21 stitches and 30 rows in stockinette stitch.

Edia is an oversized sweater with a central cable panel, vent in the sides and a crew neck crowned by an I-cord bind off. The pullover has dropped shoulders and simple cables on the sleeves. Edia is an old Norwegian female name fitting for this relaxed sweater knitted in the gorgeous pelt wool yarn Tinde from Hillesvåg Ullvarefabrikk. The sweater is worked back and forth in pieces and seamed. The neck is deeper on the front, than on the back.

I have graded the pattern from size XS to 3XL with measurements from 136 cm to 184 cm/53.5 to 72.5″. In these photos taken by my husband in Barcelona, you see me wearing size Small with a bust circumference of 144 cm/56.75″.

Above you can see the cable detail. The English pattern will be test knitted in my Ravelry group beginning on the 18th of May, before the pattern is released. I have one more new design to show you, before you will see how these designs looked on my model Olivia Lindtein.

Share

Macha Jacket Knitted by Erdmuthe

Posted on by

I want to share the beautiful Macha Jacket including the cable cowl and Macha Cowl that Erdmuthe made during the test knit back in September last year. She went yarn shopping at Trollenwol in Driebergen in The Netherlands and writes on her Ravelry project page: “I still prefer going to a “real” shop, seeing the colors and feeling the yarns. It took me quite a while before I was satisfied about the combination of colors”. Erdmuthe chose Hillesvåg Ullvarefabrikk Sølje in 2126 Grønn as the main colour, 2106 Turkis as the contrast colour 1 and Vilje in Hvit (read: Natural) as the contrast colour 2. The yarn is the same as I used for the sample the pelt wool Sølje and the lambswool Vilje. The size she adjusted to fit her and began working an XL decreasing down to a L, as well as adding extra length to it. Erdmuthe also decided to work the body in one piece. You can read more on her detailed project page on Ravelry and follow her as erdmuthe9977 on Instagram.

“It’s a great design, lots of interesting features that will keep you busy for some time.
The finished Jacket is going to be worn a lot this coming winter”.

Erdmuthe ends her project page notes with: “I forgot about the cable cowl. A very quick knit in the round. Chose to work it in color C as I loved the “Türkis” and wanted to give it some “attention” and opportunity to show a bit off.” Finally she chose to use only 3 buttons from Luena, that she discovered at the Hannover fair. Thank you so much for making this stunning version, Erdmuthe!

Here is my introduction to the Macha Jacket pattern – the Macha Cowl  (the stranded colorwork one) is a separate pattern, both are available in my Ravelry Store: Macha is the Celtic protectress in peace as well as the name of this heavily textured jacket with cable and tweed body and stranded colorwork sleeves. A tuck marks the end of the cable pattern, the beginning of both the tweed pattern and the deep v-neck shaping. The Macha body is worked in pieces but the sleeves are knitted in the round to the armhole in stranded colourwork with purl stitches and garter stitch stripes in three contrasting colors in both Hillesvåg Ullvarefabrikk Vilje Lamull and Sølje Pelsull. A cable cowl completes the jacket which can also be worn together with the Macha Cowl.

Share

New Design: Rebine

Posted on by

Just as promised here is the skirt Rebine, designed for Hillesvåg Ullvarefabrikk, knitted in  the Tinde pelt wool yarn, using a 3.5 mm/US 4 needle by the skilled sample knitter Kristin Nygård, aka quiltefeen! One of my patrons, Tamar aka tamari.joy on Instagram, suggested I design a pencil skirt and I loved that idea. Hence Rebine was designed before I made Jendine to go with it, so you would have a set option if you so desire. I wanted it to sit properly and be as flattering as possible, so I shaped it for both the hip and the waist. The pattern stitch I selected was a cable rib. Instead of inserting an elastic for the waist, I chose a high waist and made belt loops that are inserted into the seam in the side.

Rebine, an old Norwegian name, is a pencil skirt with an all over elegant cable pattern ending in a high waist. The skirt is shaped for the hip and the waist. Belt loops, inserted in each side seam, hold the skirt in place. Rebine is knitted in Tinde pelt wool by Hillesvåg Ullvarefabrikk. Below you see the skirt worn with Ovedine, knitted in the thinner Sølje Pelsull, hand dyed by Værbitt in two colours: Drageegg and Lillebror.

The Tinde Pelsull is made of 100% pelt wool with 260 meters/284 yards on each 100 gram skein. The sample is knitted in Lys Marine 2125 and requires only 3 skeins in the two smallest sizes. Rebine is knitted with a 21 stitches and 30 rows in Stockinette stitch gauge measuring 10 cm/4″ square.

In these photos taken by Michael in Barcelona last November, I am wearing size Small with a 92 cm/36.25″ hip measurement. I have graded the skirt in sizes XS to 3XL with hip measurements from 86 to 132 cm/33.75 to 52″. Due to the cable rib pattern, the skirt is very elastic.

The skirt is worked in pieces from the bottom and up. Make two belt straps to insert in the side seam. If you want to adjust the length of the skirt, remove up to 8 cm/3.25″ or add an extra length before shaping the hip.

The test knit of Jendine begins on the 16th of March and it is followed by a test knit for Rebine on the 6th of April, both in my Ravelry group. Yarn kits for both designs will be available from Hillesvåg Ullvarefabrikk. I look forward to showing you how this set looked on my model Olivia Lindtein!

Share

New Design: Jendine

Posted on by

Next out in the series of new designs for Hillesvåg Ullvarefabrikk is the Jendine pullover. It was made to go together with the Rebine skirt as a set, but works equally well with trousers. I chose a narrow cable that looks like a more advanced rib to adorn the center and wanted a high low effect for the pullover. Jendine and Rebine are both knitted in Tinde pelt wool, using a 3.5 mm/US 4 and a 3 mm/US 2.5 for the sleeve band by my skilled sample knitter Kristin Nygård, aka quiltefeen! Michael took these photos of me, wearing size S with a 90 cm/35.5″ bust, in Barcelona, when I was teaching at Barcelona Knits 2019 back in November last year.

Jendine is an a-line pullover with a panel of elegant cable ribbing at the center, longer rounded hem at the back and a shorter front. The v-neck splits the cable panel into two parts each framed with an I-cord. Jendine is an old historic Norwegian name that fitted this flowing pullover, that can be worn together with the Rebine skirt. Jendine is worked in the beautiful Tinde pelt wool by Hillesvåg Ullvarefabrikk.

I have graded Jendine and Rebine (I will make a separate post with more photos of the skirt, especially the top of it) in sizes XS to 3XL with finished bust measurements of 84 to 136 cm/33 to 53.5″.

The test knit of Jendine begins on the 16th of March and it is followed by a test knit for Rebine on the 6th of April, both in my Ravelry group. I look forward to showing you how this set looked on my model Olivia Lindtein!

For more details on the design, become a patron and receive rewards like monthly newsletter, sneak peeks, free pattern(s), monthly video, all depending on the level chosen, see more details here: www.patreon.com/lindamarveng

Share

Epona Pattern Released

Posted on by

The test knit of the Epona has come to an end and the pattern have been released in both English and Norwegian. My test knitters did a brilliant job; correcting and improving the pattern. I was so excited to see all the different colours they chose. Soon I will show you more versions of Epona. The design was made for Hillesvåg Ullvarefabrikk in the Sølje Pelsullgarn. On the pattern cover the sweater is worn by Kaja Kvernbakken, with make-up & hair by Sissel Fylling and jewellery by Kaja Gjedebo Design, photographed by Eivind Røhne at the Oslofjord Museum in May. The pattern is available from my Ravelry Store and also from Love Crafts. Below is my introduction to the pattern and pattern details.

Graceful cables run along the center of this pullover with a high rib, creating a narrower waist. A sweater perfect for riding or worn together with a skirt, it is crowned by a high collar with interfacing to make it stand up. Epona is Celtic for the Goddess of horses and knitted in Sølje Pelsull from Hillesvåg Ullvarefabrikk in a deep bottlegreen shade.

Sizes: XS (S, M, L, XL, 2XL)
Shown in size Small
Skill level: Experienced

Finished measurements:
Bust: 84 (90, 98, 104, 114, 124) cm/33 (35.5, 38, 41, 45, 49)“
Hip: 74 (80, 88, 94, 104, 114) cm/29 (31.5, 34.5, 37, 41, 45)”
Length: 59 (60, 61, 62, 63, 64) cm/23.25 (23.5, 24, 24.5, 24.75, 25.25)“
Sleeve length: 49 (50, 50, 51, 51, 52) cm/19.25 (19.75, 19.75, 20, 20, 20, 20.5)”

Yarn: Hillesvåg Ullvarefabrikk, Sølje Pelsull (100% pelt wool, 350 m/383 yds, 100 g). The sample is knitted in Green 2126; 4 (4, 5, 5, 6, 7) skeins; 1193 (1351, 1561, 1719, 1982, 2245) m/1305 (1477, 1707, 1880, 2168, 2455) yds.
https://www.ull.no/produktkategori/garn/solje-pelsullgarn/

Yarn alternatives: Cascade 220 Sport (100% wool, 50 g, 150 m/164 yds).
http://www.cascadeyarns.com/cascade-Cascade220Sport.htm
Tosh Sock (100% wool, 100 g, 361 m/394 yds).
http://madelinetosh.com/tosh-sock/
Berroco Cosma (60% alpaca, 30% wool, 10% silk, 50 g, 150 m/164 yds).
http://www.berroco.com/yarns/berroco-cosma
Or another Sport/5 ply or Fingering 4/ply yarn.

Needles: 3 mm/US 2.5 straight needles.
3 mm/US 2.5 circular needle for collar (40 cm/16”).
Adjust needle size as needed to match gauge.

Notions: Stitch markers (removable), holders, cable needle and yarn needle.

Gauge: 24 sts and 32 rows in st st using 3 mm/US 2.5 needle measures 10 cm/4” square.
29 sts and 32 rows in rib slightly stretched (average) using 3 mm/US 2.5 needle measures 10 cm/4” square.
26-sts cable panel using 3 mm/US 2.5 measures 10 cm/4” across.
50-sts cable panel using 3 mm/US 2.5 measures 19.5 cm/7.75” across.

Notes: The pullover is worked in pieces and seamed. The cable pattern continues on the collar which is worked in the round with an interfacing part.

Share