Prescott Pullover and Cambridge Cardigan Again

I wanted to show you how the Prescott Pullover and the Cambridge Cardigan – designs published in Interweave Knits Fall 2018 – look on me. Michael took these photos indoors, due to the extremely wet weather outside and also because the final pick up time for FedEx at Mail Boxes in Oslo was approaching too fast. I did make it, I am pleased to say. The Prescott Pullover is knitted in the divine Acadia from The Fibre Co.; a luxurious mixture of  wool and alpaca with silk noil. The sample is made in the third size and measures 99 cm/39″ around the bust. I am wearing it with 11 cm/4.25″ of positive ease, while I recommend about 5 cm/2″ of ease.

The cable is time consuming to knit, but rewarding. The sample is knitted in Mountain Ash colour way and took 14 skeins to make. The gauge is 24 stitches and 30 rows in stockinette using 4 mm/US 6 measures 10 cm/4″ square due to all the cabling, while the rib gauge is 21 stitches and 30 rows. Here is the introduction to the design: “The Prescott Pullover emulates intricate iron- and stonework found on historic university buildings. This professional and sleek pullover features soft cabled bell sleeves, and the side ribbing gives it a body-hugging silhouette. The design is worked from the bottom up in pieces, and it’s finished with a cozy turtleneck.”

“The Cambridge Cardigan is the quintessential collegiate cardigan. Inspired by Scottish tartans, this preppy, oversized cardigan is ready for a chilly library, reading on the quad, or a beer at the local pub. The body of this project is worked in the round and steeked at the center and armholes.”

I secured the steeks using a crochet hook and slip stitches despite it being knitted in a pure Shetland untreated wool, Jamieson’s Shetland Spindrift – 100% wool, 105 m/115 yds on each 25 gram balls – before I cut it open at the front and at the armholes. If you are new to steeking, make a swatch in the round and cut that open first in order to gain confidence to do it on a larger project. The sample is made in the fourth size with a bust measurement of 111 cm/43.75″ and modelled with 23 cm/9″ of positive ease, while I recommend around 10 cm/4″ ease. The Cambridge Cardigan is knitted using 3 mm/US 2.5 and 3.25 mm/US 3 and with a gauge of 24 stitches and 33 rounds in stranded colourwork pattern on larger needle measuring 10 cm/4″ square. As you can see of the back photo the vertical lines in the contrast colour 2 (CC2) are made of duplicate stitches/swiss darning using a darning needle on the fronts and at the center back at the end.

Pattern of the Week: Prescott Pullover

The editorial staff at Interweave has blogged about both designs to my utter delight and you can read the blogposts by clicking on the inserted links.

Interweave Knits Fall 2018: Cambridge Cardigan

The Interweave Knits Fall 2018 issue is available in a digital edition or print edition. In Norway you can buy the print issue at larger Narvesen stores or order it at your local one. Do join the Prescott Pullover KAL or the Cambridge Cardigan KAL in my Ravelry group if you are interested and join the party.

Share

Photoshoot at Bøler Church: Ena

The next set of photos from our shoot is of Ena, knitted in The Fibre Company’s Acadia, beautifully worn by Emma Ross leaning towards the rusty cor-ten wall panel with Bøler Kirke/Church carved into it. Photographer Eivind Røhne who captured these brilliant shoots made sure to position Em so that the two letters “Bø” as in “Boo!” was visible at all times. Yes, we do have a lot of fun! Hair & makeup stylist Sissel Fylling made sure that Em’s hair was not covering up the collar. On Em’s finger is one of Kaja Gjedebo Design’s statement rings in gold-plated silver.

Ena is Celtic for fiery. As you need to be passionate about cables to make this jacket. The woven cables lean towards the left and the right hence the spine has been accentuated with a twisted stitch at the center back and along front opening. Ribbing in the sides make the jacket appear casually fitted. The collar in rib can be worn open or closed and folded over. Ena is knitted in the rustic Acadia with silk noil from The Fibre Company.

The bespoke buttons are made by Siri Berrefjord in a brown orange colour she matched to my knitted swatch, ideal for this dressy jacket I styled with a pair of wide silk trousers in navy. The handmade buttons are moulded in plastic after old traditional national costume/bunad silver. You can look forward to seeing her stunning photos later. Siri is also a photographer so even the yarn and stitch definition can then be studied in detail!

The cable I chose is from Norah Gaughan’s brilliant Knitted Cable Sourcebook, so no surprise there, as I have found a lot of inspiration in it. The Acadia yarn, made of 60% merino wool, 20% alpaca, 20% silk with 133 meters/145 yards on each 50 gram skein and it is a luxury to both knit and to wear. I used a 4 mm/US 6 needle with a 21 stitches and 30 rows  in Stocking stitch measuring 10 cm/4″ square gauge. The jacket is made in pieces and seamed. The collar is picked up and knitted before the buttonband. The last buttonhole is on collar before fold over.

Em is wearing size S with a bust circumference of 92 cm/36.25″, worn with 6 cm/2.25″ positive ease. The cardigan is graded in sizes XS to 2XL with a bust circumference of 84 to 124 cm/33 to 48.75″. The English pattern will be test knitted in my Ravelry group, beginning on March 12th, before it is released at the end of April.

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

Share